Dela länk via e-post
Inte alla nödvändiga fält fylldes
Skicka e-post

    Typ 6080 - Direct-acting 2/2-way plunger valve up to 900 bar

      Array

    Beskrivning

    The valve Type 6080 is a direct-acting plunger valve for hydrogen applications. The plunger guiding tube and stopper are screwed together to increase the pressure resistance in contact with hydrogen. Certified 3.1 materials suitable for hydrogen and carbon-coated magnetic steels are used. Each valve is subject to a functional test at maximum nominal pressure. The external leakage at nominal pressure is 5x 10-5 mbar l/s. On request, the push-over coil can be provided as a Zone 1 or Category 2 explosion-proof version.

    • Hydrogen-resistant screwed fluid housing
    • Function test with forming gas at nominal pressure
    • Explosion-proof design ATEX and IECEx
    • Inspection holes for monitoring the process seal
    • Normally Open (NO) versions on request

    För att välja rätt produkt hänvisas till tekniska data, bilder och anteckningar för att säkerställa korrekt användning i enlighet med databladet.

    Applikationer & Verktyg

    Ladda ner

    Datablad

    Beskrivning
    Filstorlek
    Språk / Land
    DTS Data sheet Type 6080 | Direct-acting 2/2-way plunger valve up to 900 bar 598,2 kB EN / EU
    DTS 数据表 6080 型 | 最高 900 bar 的直动式二位二通电磁阀 815,4 kB ZH / CN
    DTS Datenblatt Typ 6080 | Direktwirkendes 2/2-Wege Hubankerventil bis 900 bar 599,7 kB DE / DE

    Manual

    Beskrivning
    Filstorlek
    Språk / Land
    MAN Operating Instructions Type 6080 | 2/2-way solenoid valve 354,4 kB EN / EU
    MAN 操作手册 6080 型 | 二位二通电磁阀 915,6 kB ZH / CN
    MAN Bedienungsanleitung Typ 6080 | 2/2-Wege Magnetventil 360,7 kB DE / DE
    MAN Manuel d'utilisation Type 6080 | Électrovanne 2/2 voies 345,7 kB FR / FR

    Försäkran

    Beskrivning
    Filstorlek
    Språk / Land
    ABD EU-DoC|EU Declaration 36,8 kB EN,FR,DE