INSTICKS-anordning för flödes- eller analysmätningar
Typ S020 / Artikelnr. 428675
Artikelbeskrivning
Anordningen kan användas för anslutning av valfria insticksinstrument för mätning i rör, t ex för flödes-, pH-, redoxpotential- och konduktivitetsmätningar. Anordningen finns för impeller- och magnetiskt-induktiva flödesmätinstrument samt för analysmätinstrument med G2"- eller klämanslutning.
- Statistiskt varunummer
- 90261021
- Land
- FR
Tekniska specifikationer
Namn |
Värde |
Enhet |
---|---|---|
Type | S020 | |
Product sub-group | Fitting | |
Temperature medium min | 0 | °C |
Temperature medium max | 50 | °C |
Nominal pressure (DIN EN 1333) | PN 10 | |
Fitting electronic interface | Insertion 2 (inch) | |
Min measured value of volume flow rate | 2.400 | |
Max measured value of volume flow rate | 80.023 | |
Measured value unit | l/h | |
Diameter measuring tube (DN) | 50 | mm |
Fluidic port connection number | 2 | |
Port connection 1 type | Bonded sleeve | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 2 3/4 | |
Port connection 1 size DN | DN 50 | |
Port connection 1 DN inch | 2 | Inch2 |
Port connection 1 inner diameter (mm) | 63 | mm |
Port connection 1 outer diameter (mm) | 74 | mm |
Port connection 1 adhesive bonding | DIN 8063 | |
Port connection 2 type | Bonded sleeve | |
Port connection 2 thread type | G | |
Port connection 2 thread marking | 2 3/4 | |
Port connection 2 size DN | DN 50 | |
Port connection 2 DN inch | 2 | Inch2 |
Port connection 2 inner diameter (mm) | 63 | mm |
Port connection 2 outer diameter (mm) | 74 | mm |
Port connection 2 adhesive bonding | DIN 8063 | |
Port connection material category | Plastics | |
Port connection material | PVC (Polyvinyl chloride) | |
Measuring pipe material | PVC (Polyvinyl chloride) | |
Armature material | PVC (Polyvinyl chloride) | |
Medium-contacting parts seal material | FKM (Fluor rubber) | |
Installation length | 212 | mm |
Vikt | 0,101000 | kg |