Bürkert
2/2-läges membranventil ELEMENT, pneumatiskt styrd
Typ 2103 / Artikelnr. 299565
Artikelbeskrivning
Membranventilen, typ 2103, består av ett pneumatiskt manövrerat kolvdon, ett membran och ett 2-vägs ventilhus. Den högkvalitativa drivenheten med kapsling av rostfritt stål garanterar korrekt användning vid hygieniska eller aggressiva omgivningsvillkor. Det strömlinjeformade ventilhuset utan döda utrymmen möjliggör höga flödesvärden och många användningsmöjligheter. Drivenhetens design möjliggör enkel integration av automatiseringsenheter i alla utbyggnadssteg, från den elektriska/optiska fjärrindikeringen via den pneumatiska aktiveringen till det integrerade bussgränssnittet och en explosionsskyddad enhetsvariant. Det helt integrerade systemet av ventil och automatiseringsenhet utmärker sig genom kompakt design med släta ytor, integrerade styrluftskanaler, skyddsklass IP65/67/NEMA4X och hög kemisk beständighet.
- Statistiskt varunummer
- 84818087
- Land
- DE
Tekniska specifikationer
Namn |
Värde |
Enhet |
|---|---|---|
| Type | 2103 | |
| Product sub-group | On/off valves | |
| Main valve operating principle | Diaphragm valve | |
| Valve piloting type | Pneumatic | |
| Valve construction | Valve complete | |
| Actuator version | ELEMENT | |
| Control function | A - normally closed (NC) | |
| Valve function number of switching positions | 2 | |
| Actuator size | 70 | mm |
| Actuator material | PPS (Polyphenylene sulphide) | |
| Actuator envelope material | Stainless steel | |
| Control air connection material | Plastic | |
| Control air connection type | Plug-in connection (hose) | |
| Control air connection diameter (mm) | 6 | mm |
| Control air connection diameter (inch) | 1/4 inch | |
| Control air connection 2 pre-mounted | Silencer 902662 | |
| O-ring between cover and bush | No | |
| Position monitoring via magnetic piston | No | |
| Valve function manual actuation | No | |
| Additional manual actuation included | No | |
| Body nominal size | 15 | mm |
| Body nominal size (IN) | 1/2 inch | |
| Diaphragm coupling | Bayonet | |
| Seat seal / diaphragm material | PTFE with EPDM support back | |
| Fluidic port connection number | 2 | |
| Valve body material category | Metals | |
| Valve body material | Stainless steel | |
| Valve raw body manufacture | forged | |
| Valve body surface treatment internal | electropolished | |
| Valve body surface treatment external | Electropolished | |
| Surface finish internal | RA 0,38 µm | |
| Port connection 1 size DN | DN 15 | |
| Port connection 1 type | Clamp | |
| Port connection 1 pipe standards 1 | ISO 4200 | |
| Port connection 1 inner diameter (mm) | 18,1 | mm |
| Port connection 1 wall thickness (mm) | 1,6 | mm |
| Port connection 1 outer diameter (mm) | 21,3 | mm |
| Port connection 1 clamp | DIN 32676 series B (ISO) | |
| Port connection 1 clamp outer diameter (mm) | 50,5 | mm |
| Port connection 2 size DN | DN 15 | |
| Port connection 2 type | Clamp | |
| Port connection 2 pipe standards 1 | ISO 4200 | |
| Port connection 2 inner diameter (mm) | 18,1 | mm |
| Port connection 2 wall thickness (mm) | 1,6 | mm |
| Port connection 2 outer diameter (mm) | 21,3 | mm |
| Port connection 2 clamp | DIN 32676 series B (ISO) | |
| Port connection 2 clamp outer diameter (mm) | 50,5 | mm |
| Nominal pressure min | 0 | bar |
| Nominal pressure max | 10 | bar |
| Control pressure min | 4,8 | bar |
| Control pressure max | 10 | bar |
| Temperature environment min | -10 | °C |
| Temperature environment max | 60 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 130 | °C |
| Kv value (water) | 6 | m3/h |
| Nominal pressure (DIN EN 1333) | PN 16 | |
| Nominal Pressure (DIN EN 1759) | Class 150 | |
| CIP capable | Yes | |
| SIP capable | Yes | |
| Vikt | 1,597000 | kg |
Kan kombineras med
Applikationer & Verktyg
Ladda ner
Datablad
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
Type 2103 data sheet | pneumatically operated diaphragm control valve with cast body | 2,4 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm control valve with forged body | 2,3 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with cast body | 2,5 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with forged body | 2,2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with tube valve body | 1,9 MB | EN / EU |
|
|
Type 2XXX data sheet | accessory for pneumatic acutators CLASSIC and ELEMENT | 797,2 kB | EN / EU |
|
|
Tipo 2103 hoja de datos | válvula de control de membrana [cuerpo de fundición] | 3,1 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de control de membrana [cuerpo forjado] | 3 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de membrana On/Off [cuerpo de fundición] | 2,4 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de membrana On/Off [cuerpo forjado] | 2,5 MB | ES / ES |
|
|
Typ 2103 Datenblatt | pneum. betätigtes Membranventil Auf/Zu mit Rohrumformgehäuse TVB(V) | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membran-Regelventil mit Feingussgehäuse | 2,1 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membran-Regelventil mit Schmiedegehäuse | 3,2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membranventil Auf/Zu mit Feingussgehäuse | 2,1 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membranventil Auf/Zu mit Schmiedegehäuse | 2,2 MB | DE / DE |
|
|
Typ 2XXX Datenblatt | Zubehör für pneumatische Antriebe CLASSIC und ELEMENT | 804,8 kB | DE / DE |
Manual
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
Additional manual Type 2031 | PE05 Removing the pressure piece from diaphragm valves | 846,6 kB | EN,FR,DE / EU |
|
|
Additional manual Type 2100 | PX15 Use in the potentially explosive area Category 2 | 273,3 kB | EN,FR,DE,ML / EU |
|
|
Additional manual Type xxxx |PX51 use in the potentially explosive area Category 2 | 272,9 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 2103 2104 2105 | Piston-controlled diaphragm valve | 2,3 MB | EN / EU |
|
|
Quickstart Type 2103 2104 2105 | Piston-controlled diaphragm valve | 1,6 MB | EN / EU |
|
|
Bedienungsanleitung Typ 2103 2104 2105 | Kolbengesteuertes Membranventil | 2,3 MB | DE / DE |
|
|
Manuel d'utilisation Type 2103 2104 2105 | Vanne à membranecommandée par piston | 2,3 MB | FR / FR |
|
|
Quickstart Typ 2103 2104 2105 | Kolbengesteuertes Membranventil | 1,6 MB | DE / DE |
|
|
Quickstart Type 2103 2104 2105 | Vanne à membrane commandéepar piston | 1,6 MB | FR / FR |
EU-försäkran
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 2,3 MB | EN,FR,DE |
Funktionell modell
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
3D-Animation - Actuator ELEMENT | 4 MB | EN |
|
|
3D-Animation - Antrieb ELEMENT | 3,9 MB | DE |
Informationsblad och kataloger
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
1,3 MB | SE | |
|
|
Product Overview Process & Control Valves | 3,4 MB | SE |
|
|
Advantages Tube Valve Body | 153,6 kB | EN / EU |
|
|
Diaphragm competence for hygienic applications | 1,2 MB | EN / EU |
|
|
Flyer Best Practice - A new formulation line for insulin vials. | 401,1 kB | EN / GB |
|
|
Flyer Best Practice - Diaphragm valves for an automated production line at Unither Pharmaceuticals. | 351,1 kB | EN / GB |