Bürkert
2/2- eller 3/2-läges magnetventil med skiljemembran, direktstyrd
Typ 0330 / Artikelnr. 342084
Artikelbeskrivning
Ventilen 0330 är en direktstyrd ventil med mediaseparering och fällbart ankare. Den finns också i 3/2- och 2/2-läges utförande. Som 3/2-lägesventil kan den också användas som fördelnings- eller blandningsventil. Beroende på applikationen finns olika membranmaterial och arbetssätt till förfogande. Mässingshöljet i standardutförande uppfyller alla europeiska krav för dricksvatten. Utbudet kompletteras av ventilhus i rostfritt stål (316L), PVDF och polypropylen. Magnetspolarna tätas med epoxi med hög kemisk beständighet. För idrifttagning och provning är ventilen 0330 utrustad med handmanöver. För reducering av energibehovet kan alla spolar levereras med elektronisk effektreducering eller som pulsversion. Kopplingsläget kan ställas in via en regulator med binär- eller NAMUR-signal. I kombination med en stickkontakt enligt DIN EN 17301-803 form A uppfyller ventilerna skyddsklass IP65/67 - i kombination med ett hölje i rostfritt stål eller eller i syntetmaterial NEMA 4X.
- Statistiskt varunummer
- 84818079
- Land
- DE
Tekniska specifikationer
Namn |
Värde |
enhet |
|---|---|---|
| Type | 0330 | |
| Operation | direct-acting | |
| Actuator type | Pivot | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | T - for universal use - port connections 1 (P/NC), 2 (A/in/out) and 3 (R/NO) depending on application | |
| Fluidic port connection number | 3 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 4 | bar |
| Main valve orifice 1 (P) (mm) | 4 | mm |
| Main valve orifice 1 (inch) | 5/32 inch | |
| Main valve orifice 3 (R) (mm) | 4 | mm |
| Kv value (water) | 0,23 | m3/h |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/4 | |
| Port connection 3 type | Inner thread | |
| Port connection 3 thread type | G | |
| Port connection 3 thread marking | 1/4 | |
| Valve seat material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Seat seal material Shore hardness | 70 | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment max | 55 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 60 | °C |
| Temperature surface max | 155 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| AC voltage | No | |
| DC voltage | Yes | |
| Battery voltage | Yes | |
| Rated power DC | 11 | W |
| Reduced power DC | 11 | W |
| Rated power consumption | 8 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00132445 - 2508 | |
| Electrical connection position | top | |
| Electrical connection polarity | Irrelevant | |
| Electrical connection material | Brass | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 20 | ms |
| Switch time close min | 10 | ms |
| Switch time close max. | 20 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | Yes | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Installation length | 46 | mm |
| Mounting type | Metric screws | |
| Parts free of oil and grease | Yes (according to DIS 1000020797) | |
| Valve construction | Valve complete | |
| Vikt | 0,46 | kg |
Kan kombineras med
Applikationer & Verktyg
Ladda ner
Datablad
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
Type 0330 data sheet | pivoted armature valve | 1 MB | EN / EU |
|
|
Typ 0330 Datenblatt | Klappanker-Magnetventil | 1 MB | DE / DE |
|
|
Type 0330 Fiche technique |Électrovanne à armature battan2/2 ou 3/2 voies à action dire | 1 MB | FR / FR |
Manual
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
Additional manual 0330 | FM Division 1 US/CA V2.0 | 206 kB | EN / US |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 012X 0330 033X | 2/2-way and 3/2-way solenoid valve | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type 0330 0331 | 2/2-way or 3/2-way solenoid valves, direct-acting | 571 kB | EN / EU |
|
|
Operating Instructions Type 0780 | ATEX approval | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v2.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 2 MB | DE / DE |
|
|
Manual d'utilisation Type ACP016 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Manual de instrucciones Modelo 0121, 0330, 0331 | Electroválvula de 2/2 o 3/2 ví | 954 kB | ES / ES |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 2 MB | FR / FR |
EU-försäkran
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 2 MB | EN,FR,DE |
Funktionell modell
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
3D-Animation - 0330 | 1 MB | EN |
Informationsblad och kataloger
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
Brochure contains the following types: 0121 0124 0330 0331 0780 0788 0789 | 1 MB | SE |
|
|
723 kB | AF | |
|
|
For safe and reliable analysis in In-Vitro Diagnostics | 838 kB | EN / EU |
|
|
Media separation ensures continous and safe processes | 599 kB | EN / EU |
|
|
Selection Disc | 641 kB | EN / US |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |