Bürkert
Servostyrd 2/2-vägs-membranventil
Typ 6213 / Artikelnr. 227534
Artikelbeskrivning
Ventilen 6213 EV är en servostyrd membranventil i serien S.EV. Membranets fjäderkoppling stödjer ventilens öppningsprocedur. I standardutförande är ventilen lämplig för användning i vätskor. För fullständig öppning av ventilen krävs ett minimidifferenstryck. För gas- och vakuumanvändning finns ett särskilt utförande (HP00), som öppnar ventilen utan differenstryck. Beroende på applikationen finns olika membranmaterial till förfogande. Mässingshöljet i standardutförande uppfyller alla europeiska krav för dricksvatten. För ytterligare behov finns blyfria eller avzinkningsbeständiga mässingsarter till förfogande. Vårt anbud av ventilhus avrundas av en variant i rostfritt stål. Magnetspolarna tätas med epoxi med hög kemisk beständighet. För reducering av energibehovet kan alla spolar levereras med elektronisk effektreducering. I kombination med en stickkontakt enligt DIN EN 17301-803 form A uppfyller ventilerna skyddsarten IP65 - i kombination med ett hölje i rostfritt stål NEMA 4X.
- Statistiskt varunummer
- 84818079
- Land
- DE
Tekniska specifikationer
Namn |
Värde |
Enhet |
|---|---|---|
| Type | 6213 | |
| Operation | servo-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Diaphragm valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 10 | bar |
| Nominal pressure (DIN EN 1333) | PN 10 | |
| Main valve orifice 1 (P) (mm) | 25 | mm |
| Main valve orifice 1 (inch) | 1 inch | |
| Kv value (water) | 11 | m3/h |
| Main valve wetted material | Brass | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1 1/4 | |
| Valve seat material | Brass | |
| Medium-contacting part core material | Stainless steel | |
| Medium-contacting part stopper material | Stainless steel | |
| Pilot control material medium-contacting | PA (Polyamide) | |
| Valve body cover material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | NBR (Nitrile rubber) | |
| Sealing toward outside material | NBR (Nitrile rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 80 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| AC voltage | No | |
| DC voltage | Yes | |
| Battery voltage | Yes | |
| Rated power DC | 28 | W |
| Reduced power DC | 28 | W |
| Rated power consumption | 28 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | not included | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 65 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Coil special feature | for high temperatures | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 300 | ms |
| Switch time open max. | 400 | ms |
| Switch time close min | 700 | ms |
| Switch time close max. | 1.500 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control orifice (mm) | 1,4 | mm |
| Pilot control seal material | NBR (Nitrile rubber) | |
| Pilot control centrally bolted | Yes | |
| Low-noise version | No | |
| Damping disc material | EPDM (Ethylene-propylene-diene rubber) | |
| Core guide | Sliding ring | |
| Main valve with integrated screen | No | |
| Installation length | 95 | mm |
| Valve construction | Valve complete | |
| Vikt | 2,241000 | kg |
Kan kombineras med
Applikationer & Verktyg
Ladda ner
Datablad
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
Type 6213 data sheet | servo-assisted diaphragm valve | 702 kB | EN / EU |
|
|
Typ 6213 Datenblatt | servogesteuertes Membranventil | 858 kB | DE / DE |
|
|
Type 6213 Fiche technique |Vanne à membrane 2/2 voies pilotée | 1 MB | FR / FR |
Manual
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6213 | safety shut-off device for combustion installations | 833 kB | EN,FR,DE / EU |
|
|
Additional manual Type AC19 | Solenoid coil AC19, II 2G/D Ex approval | 2 MB | EN / EU |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Návod k obsluze Type 6213 | 2/2-cestný magnetický ventil | 1 MB | / CZ |
|
|
Operating Instructions Type 6213 6281 | 2/2-way solenoid valve | 1 MB | EN / EU |
|
|
Operating Instructions Type 6213 | 2-way solenoid valve, internally piloted | 474 kB | EN / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Service manual Type 6213 | Replacement of coil set and stopper set | 922 kB | EN,FR,DE / EU |
|
|
Supplement Type 6213 | Versions with integrated High-performance electronics | 306 kB | EN / EU |
|
|
Bedienungsaneitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ 6213 6281 | 2/2-Wege-Magnetventil | 1 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 1 MB | DE / DE |
|
|
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | Cewka elektromagnesu, Typ AC10 | 2 MB | PL / PL |
|
|
Instrukcja obsługi Typ 6213 EV, 6281 EV | 2/2-drogowy zawór elektromagnetyczny | 1 MB | PL / PL |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1 MB | IT / IT |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1 MB | PT / BR |
|
|
Manual de operação Bobina magnética tipo AC10 | PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | 1 MB | PT / BR |
|
|
Manuel d'utilisation Type 6213 6281 | Électrovanne 2/2 voies | 1 MB | FR / FR |
|
|
Manuel supplémentaire Type AC19 | Bobine magnétique AC19, homologations II 2G/D Ex | 2 MB | FR / FR |
|
|
Zusatzanleitung Typ AC19 | Magnetspule Typ AC19, II 2G/D ExZulassung | 2 MB | DE / DE |
EU-försäkran
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 5 MB | EN,FR,DE |
Funktionell modell
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
3D-Animation - 6213 | 3 MB | EN |
Informationsblad och kataloger
Beskrivning |
Filstorlek |
Språk / Land |
|
|---|---|---|---|
|
|
Safety shut-off valves for oil burners in accordance with EN ISO 23553-1Brochure contains the following types: 6027 5406 5407 6213 | 773 kB | EN / EU |
|
|
723 kB | AF | |
|
|
Solenoid valves for safety in your plant | 787 kB | EN / EU |